HP 70000 series, User Manual

Page: 320 / 447

Operating Errors 2000 { 2999
Operating Errors 2000 { 2999
Operating errors occur when the spectrum analyzer is operated incorrectly .
2000
No errors
Cause: This message is returned from querying the system when no error is present in the
system.
2001
Illegal command
Cause: The remote command sent over the bus or executed as part of a DLP was not a legal
remote command. This error could also occur if a User V ariable (V ARDEF), which did not exist,
was used as a parameter in a remote command. Check for missing terminators , and the proper
number of parameters . Also verify that delimited strings have are properly ended.
Cure: Use the DEBUG command to locate the programming error . Refer to the DEBUG
command description in the HP 70000 Modular Spectrum Analyzer Programming Manual.
2002
Illegal parameter
Cause: This is a user-generated system protocol error .
2003
Missing parameter
Cause: The command being executed requires more parameters than were provided, or a user
variable V ARDEF used as a parameter for a function was not found.
Cure: Use the DEBUG command to locate the programming error . Refer to the HP 70000
Modular Spectrum Analyzer Programming Manual.
2004
Illegal character
2005
Illegal character set
2006
Parm out of range
Cause: A change was made to an instrument setting that was beyond the capabilities of the
hardware . This could be remote , DLP , or front panel changes .
Cure: Use the DEBUG command to locate the programming error . Refer to the HP 70000
Modular Spectrum Analyzer Programming Manual.
Error Messages 6-13