HP 4155A, User'S Task Manual

Page: 263 / 279

If Y ou Have A Problem
If Errors Occur
115 SMU pulse Period must be >= Width+4ms.
116 VAR1 output power too large for unit.
117 VAR1' output power too large for unit.
118 VAR2 output power too large for unit.
119 TOT SMP TM=AUTO is for LINEAR only.
A UTO can be specied for total sampling time only when LINEAR sampling
mode is selected.
120 Only LINEAR when init int <= 480 s.
When initial interval is set to 480 s or less , you cannot specify LOG or
THINNED-OUT sampling mode .
121 For LINEAR set AUTO if init int<=480 s
When initial interval is set to 480 s or less and when LINEAR sampling
mode is set, A UTO must be set in TOT AL S AMP . TIME eld.
122 TOT SP TM must be>=INIT INT 2(NOofSMP01)
T otal sampling time must be set in the following range:
total sampling time initial interval 2 (number of samples 0 1)
123 STOP CONDITION NAME is not set.
124 PGU pulse Period must be > Width.
125 PGU pulse Period must be >= Delay.
126 PG leading/trailing must be same range
PGU leading and trailing time must be set in the same range . F or details
about the ranges , see \Measurement Units" in HP 4155A/4156A User's
Dictionary R eference.
6-30