HP 4155A, User'S Task Manual

Page: 231 / 279

Filer
File Operations
T o Backup a Diskette
1. Press 4
System
5 front-panel key .
2.
Select
NNNNNNNNNNNNNNNNN
FILER primary softkey to display the SY STEM: FILER page .
3.
Select
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
DISK OPERATION secondary softkey to display setup elds .
4.
In the DISK OPERA TION eld, select
NNNNNNNNNNNNNNNNNNNNNNNNNNNNN
DISK COPY secondary softkey .
5.
Insert the source diskette , then select
NNNNNNNNNNNNNNNNNNNNNNN
EXECUTE primary softkey , then
select:
NNNNNNNNNNN
YES primary softkey to execute disk copy .
NNNNNNNN
NO primary softkey to cancel disk copy .
6. After the target diskette message is displayed, remove the source diskette ,
conrm that target diskette is initialized, insert the target diskette , then
select:
NNNNNNNNNNN
YES primary softkey to execute disk copy .
NNNNNNNN
NO primary softkey to cancel disk copy .
Note that source and target diskettes must be same format and size .
7.
Select
NNNNNNNNNNNNNN
EXIT primary softkey to exit the DISK COPY function.
The PROGRESS ST A TUS eld shows what percent the disk copy is completed.
The internal memory capacity may not be sucient to perform the entire disk
copy . If so , swap the source and target disks every time the swap message is
displayed.
5-26