HP 4155A, User'S Task Manual

Page: 123 / 279

Making a Measurement
Sweep Measurements
T o Set up Graphical Display of Measurement Results
1. Press 4
Displa y
5 key in the P A GE CONTROL key group .
2.
Select
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
DISPLAY SETUP primary softkey .
3.
In the DISPLA Y MODE eld, select
NNNNNNNNNNNNNNNNNNNNNNNNNN
GRAPHICS secondary softkey .
4. In the Xaxis column, enter variable name , select axis scale , and enter
minimum and maximum values .
5. In the Y1axis column, enter variable name , select axis scale , and enter
minimum and maximum values .
6. If you use Y2 axis , enter variable name , select axis scale , and enter
minimum and maximum values in Y2axis column.
When the pointer is in the NAME row , the allowable variable names appear
in the secondary softkey area. T o set a variable name , select the desired
secondary softkey . The allowable names are names that you already set up
on the CHANNEL DEFINITION, USER FUNCTION, and USER V ARIABLE
pages .
T o display a grid on the plotting area.
In GRID eld, select
NNNNNNNN
ON secondary softkey .
T o remove the grid.
In GRID eld, select
NNNNNNNNNNN
OFF secondary softkey .
T o control display of line parameters on GRAPHICS page.
In LINE P ARAMETER eld, select
NNNNNNNN
ON to display or
NNNNNNNNNNN
OFF to not display . Line
parameters are the X and Y intercepts and gradient of the analysis lines .
T o set up variable to be displayed on the GRAPHICS page.
In D A T A V ARIABLES elds , select secondary softkey for desired variable .
3-30