HP 2610, Advanced Traffic Management Manual

Page: 169 / 364

Spanning-Tree Operation
802.1s Multiple Spanning Tree Protocol (MSTP)
Syntax: spanning-tree config-revision < revision-number >
This command configures the revision number you designate
for the MST region in which you want the switch to reside.
This setting must be the same for all switches residing in the
same region. Use this setting to differentiate between region
configurations in situations such as the following:
• Changing configuration settings within a region where you
want to track the configuration versions you use
• Creating a new region from a subset of switches in a current
region and want to maintain the same region name.
• Using the
pending
option to maintain two different
configuration options for the same physical region.
Note that this setting must be the same for all MSTP switches
in the same MST region. (Range:
0 - 65535
; Default:
0
)
Note: This option is available only when the switch is
configured for MSTP operation.
Syntax: spanning-tree max-hops < hop-count >
This command resets the number of hops allowed for BPDUs
in an MST region. When an MSTP switch receives a BPDU, it
decrements the hop-count setting the BPDU carries. If the hop-
count reaches zero, the receiving switch drops the BPDU. Note
that the switch does not change the message-age and
maximum-age data carried in the BPDU as it moves through
the MST region and is propagated to other regions. (Range: 1
- 40; Default: 20)
5-61