HP 2610, Advanced Traffic Management Manual

Page: 25 / 364

Getting Started
Need Only a Quick Start?
■ For information on a specific command in the CLI, type the command
name followed by “help”. For example:
Figure 1-3. Getting Help in the CLI
■ For information on specific features in the Web browser interface,
use the online help. For more information, refer to the
Management
and Configuration Guide
for your switch.
■
For further information on ProCurve Networking switch technology,
visit the ProCurve website at:
www.procurve.com
Need Only a Quick Start?
IP Addressing
If you just want to give the switch an IP address so that it can communicate
on your network, or if you are not using multiple VLANs, ProCurve
recommends that you use the Switch Setup screen to quickly configure IP
addressing. To do so, do one of the following:
■ Enter
setup
at the CLI Manager level prompt.
ProCurve# setup
■
In the Main Menu of the Menu interface, select
8. Run Setup
For more on using the Switch Setup screen, see the
Installation and Getting
Started Guide you received with the switch.
1-5