HP 2610, Advanced Traffic Management Manual

Page: 24 / 364

Getting Started
Sources for More Information
Port Identity Examples
This guide describes software applicable to both chassis-based and stackable
ProCurve switches. Where port identities are needed in an example, this guide
uses the chassis-based port identity system, such as “A1”, “B3 - B5”, “C7”, etc.
However, unless otherwise noted, such examples apply equally to the
stackable switches, which for port identities typically use only numbers, such
as “1”, “3-5”, “15”, etc.
Sources for More Information
For additional information about switch operation and features not covered
in this guide, consult the following sources:
■ For information on which product manual to consult on a given
software feature, refer to “Product Documentation” on page xiii.
N o t e
For the latest version of all ProCurve switch documentation, including
release notes covering recently added features, visit the ProCurve
Networking website at
www.procurve.com . Click on Technical
support , and then click on Product manuals .
■
For information on specific parameters in the menu interface, refer
to the online help provided in the interface. For example:
Online Help
for Menu
Figure 1-2. Getting Help in the Menu Interface
1-4