manualshive.com logo in svg

Hospira GemStar Series, System Operating Manual

The Hospira GemStar Series is a reliable medical device, offering exceptional performance in intravenous drug delivery. Ensure accurate and safe medication administration by accessing the comprehensive "System Operating Manual" for free download. Conveniently acquire the manual from our website, providing step-by-step instructions and valuable information about product operation.

Share
Download
background image

Hospira GemStar System Operating Manual

73

Chapter 5. Intermittent

Intermittent Delivery Interruptions

Missed Start Time

6

If the programmed start time is missed, it can be changed through the Options 

Menu. Follow the steps below to reprogram the start time.

6

If the pump remains in the 

STOP

 mode and the first dose is missed, press 

[

START

] to begin delivery immediately and all remaining doses will be shifted.

6

If the pump is programmed with a delayed start time and is then powered off 

before [

START

] is pressed, the pump will skip to the NEXT occurrence of the 

programmed start time.
For example, the current time is 10:00 PM. The user sets the delayed start time for 

10:30 PM and then powers off the pump. The user does not power on the pump 

until 10:40 PM, which is 10 minutes AFTER the scheduled start time. The pump 

does not begin delivery until 10:30 PM the FOLLOWING day.

Reprogramming Start Time

1

Press [

OPTIONS

] and select

 NEXT DOSE

.

2

Use the number keys to enter the start time for the 

next dose. Press [

YES/ENTER

] to accept the change 

and exit 

OPTIONS.

d

Note: The clock cannot be changed while an Intermittent Program is in 

progress.

WARNING: If 

NO START DELAY

 is seen onscreen after the program is 

confirmed, the first dose will begin infusing immediately after 

the 

[START] 

button is pressed. If this is not desired, the 

infusion start time may be reprogrammed. Follow the steps 

below to reprogram the start time.

f

Tip: When entering the time in 12-hour format, press 

 

or

 

 

to toggle between 

AM and PM.

1

REVIEW PROGRAM

2

HISTORIES

3

KEYPAD LOCK

4

PUMP SETTINGS

5

SET CLOCK

6

PRINT

7

SPEED PROTOCOL

8

NEXT DOSE

Summary of Contents for GemStar Series






























































































































































































































Reviews:

No comments

Related manuals for GemStar Series

Jecod DP Series User Manual preview
DP Series
Brand: Jecod Pages: 3
Immergas ERP Instruction Booklet And Warning preview
ERP
Brand: Immergas Pages: 40
Enviroheat 200EH1-14 Owner'S Manual preview
200EH1-14
Brand: Enviroheat Pages: 20
Enviroheat 200EH1-14 Operation And Installation Manual preview
200EH1-14
Brand: Enviroheat Pages: 29
ProMinent gamma/ L Operating Instructions Manual preview
gamma/ L
Brand: ProMinent Pages: 81
Masterflex L/S 07519-10 Operating Manual preview
L/S 07519-10
Brand: Masterflex Pages: 67
Endress EMP 205 Manual preview
EMP 205
Brand: Endress Pages: 17
Wilden PX4 series Engineering, Operation & Maintenance preview
PX4 series
Brand: Wilden Pages: 43
EXTOL 1429388 Manual preview
1429388
Brand: EXTOL Pages: 28
Oilon S 180 Installation And Operation Manual preview
S 180
Brand: Oilon Pages: 68
TapFlo sanitary T Series Instructions For Installation, Operation And Maintenance preview
sanitary T Series
Brand: TapFlo Pages: 24
TTulpe Outdoor HD-6 Instructions For Use, Installation And Maintenance preview
Outdoor HD-6
Brand: TTulpe Pages: 24
Daikin EWAA008D2V3P-H Installation Manual preview
EWAA008D2V3P-H
Brand: Daikin Pages: 44
Texmo Industries Taro Pumps NCH 2250 Instructions & Operating Manual preview
Taro Pumps NCH 2250
Brand: Texmo Industries Pages: 34
Red Jacket CoreDEF Series Installation, Service, & Parts Lists preview
CoreDEF Series
Brand: Red Jacket Pages: 42
Jandy VSFHP185DV2A Installation And Operation Manual preview
VSFHP185DV2A
Brand: Jandy Pages: 72
umbra pompe Acuafluss 30 Operating Instructions Manual preview
Acuafluss 30
Brand: umbra pompe Pages: 46
Danfoss DHP-S&DP Installation Instructions Manual preview
DHP-S&DP
Brand: Danfoss Pages: 44

Brands by name

Popular brands

Load more brands