horsch LEEB 12 TD, Operating Instructions Manual, Page: 142 / 181

Tapered bolts on steering cylinder
Maintenance location Work instructions Interval
Suspension / steering
Diaphragm reservoir Check hydrogen pressure yearly
Tie rods and wishbone Check rubber gaskets and suspension pins 600 h
Optional equipment
PTO-shaft pump Check oil level at sight glass daily
Change hydraulic oil (HVLP 46) and filter yearly
Safety installations
Lighting and warning boards Check condition and function daily
Warning and safety stickers Check that they are in place and legible 50 h
At the end of the season
Complete machine Perform care and cleaning work; do not spray plastic parts with oil or
similar
Spray the piston rods of the hydraulic cylinder with a suitable corrosion
protection agent
Check all screw and plug-and-socket-connections for firm seating (see
torque table)
Check frame and connecting parts for condition and firm seating
Check electrical lines for damage and replace, if necessary.
Store terminal in a dry place
Brake system Drain air reservoir, close brake lines, check setting
NOTES:
• The
daily
maintenance interval refers to maintenance on each working day before working with the machine
• Follow additional maintenance notes in the respective chapters.
138 139