horsch LEEB 12 TD, Operating Instructions Manual, Page: 101 / 181

5. only for pneumatic brake system:
Press in the button (service brake) on the
releasing valve against the stop position.
The service brake system releases and the
machine can be manoeuvred.
Once the manoeuvring process is finished,
pull out the button (service brake) on the
release valve to the stop position.
6. Brake the shunting vehicle once again after
the manoeuvring process is finished.
7. Secure the machine with wheel chocks
against rolling away. Apply the parking brake
again.
8. Uncouple the machine and the shunting
vehicle.
Folding the folding boom
WARNING
Dropping or lowering machine parts can cause
severe crushing injuries etc.!
¾
No persons may stay under raised machine
parts!
¾
Order persons to leave the danger zone
around the machine. Make sure before fold-
ing that no persons are present in the danger
zone.
¾
Comply with the accident prevention instruc-
tions.
CAUTION
Damages to the machine and the supporting
surface!
¾
Fold the machine only on a level and firm
surface.
WARNING
Danger of crushing, being pulled in, being
caught or impact for operator and third par -
ties may arise if third parties remain in the
operating range of the folding boom when
unfolding or folding in the folding boom and
are caught by the moving parts of the fold -
ing boom!
These hazards can cause severe and possibly
also fatal injuries.
Keep a sufficient safety distance to moving parts
of the machine as long as the engine is running.
Make sure that persons keep a sufficient safety
distance to moving parts of the machine.
Order persons to leave the slewing range of
the machine.
Immediately release the actuator for unfolding
or folding in the folding boom, if a person enters
into the slewing range of the folding boom.
96 97