MAN1032-10-EN_EXL6_UserManual
March 12, 2020
120 | 191
14.2 Protocol Config
After opening Cscape, choose Program
→
Protocol Config, and select the port drop-down box
to select a protocol device driver. All protocol device drivers currently loaded in Cscape are
displayed in the dropdown selection. Some OCS models can be limited in the number of ports
or number of protocol device drivers that can be selected. Once a protocol is selected, the
Network, Devices, and Data (Scan List) must be configured through corresponding dialogs
accessible through the respective buttons (Network, Device, and Scan List.)
Figure 14.1
–
Protocol Config Dialog
Three fields must be configured after a protocol is selected:
1.
Network
2.
Devices
3.
Scan List
