background image

Screen Descriptions

35

CRF-362

1-3-12 

Memory - Job Details - Creasing and Fold Screen

6

1

3

2

4

5

7

8

9

10

1

Job Name

This indicates the job number, job name and the 

date of update from left to right.

2

Job Information

In the left box, the icon for the selected fold pat-

tern is displayed. In the right box, the selected 

sheet size is displayed. When using a sheet 
except A3, A4, B4 and B5, 

 is displayed.

3

Fold Position Settings

This indicates the sheet fold positions.

4

Sheet Length

This indicates the length of the sheet set on the 

Setting - Mode Selection screen.

5

Crease Position Settings

These indicate the crease positions.

6

Go to the Memory Screen

Press this button to return to the Memory screen.

7

Fold Setting

This indicates the fold setting.

OFF: The sheets are not folded.

2: 

The sheets are folded once only by the 2nd   

 

fold unit.

1+2: The sheets are folded by the 1st and 2nd    

 

fold units. Totally the sheets are folded twice.

8

Gang Crease and Fold Setting

This indicates whether the crease position and the 

fold position are ganged.

ON: The crease position and fold position are  

 

 ganged.

OFF:  The  crease  position  and  fold  position  are  not                     

          ganged.

9

Creasing Setting

This indicates the creasing setting.

ON : The sheet is creased.

OFF: The sheets are not creased.

10

Positive/Negative Reverse Mode

This indicates whether the positive/negative re-

verse mode is on or off.

ON  : Creases are  reversed.

OFF: Creases are not  reversed.

Summary of Contents for CRF-362



























































































































Reviews: