3
CRF-362
●WARNINGS for Operation
WARNINGS
•
Work alone when you operate the machine.
•
Letting someone else operate the machine could cause it to start suddenly without warning,
causing severe personal injury.
•
Keep your hands and fingers outside of the safety cover and away from any moving parts
while the machine is running. Otherwise, moving parts can cause severe personal injury.
•
Do not remove or bypass any safety features. Without these protective features, moving
parts can cause severe personal injury.
●CAUTIONS for Operation
CAUTIONS
•
If you turn off the Power switch, wait about ten seconds before turning it on again. Other-
wise, a circuit board may be damaged.
•
If a jam occurs, remove all the jammed sheets before you start the operation again. Other-
wise the machine may be damaged.
•
Do not use the machine for any improper purpose. Otherwise, the performance of the ma-
chine cannot be guaranteed.
●WARNINGS for Maintenance
WARNINGS
•
Work carefully when your hands are inside the machine, and keep them away from any
moving parts.
•
Turn off the Power switch before beginning any maintenance operation. Otherwise, the ma-
chine may start suddenly, causing severe personal injury.
•
Turn off the Power switch before correcting the cause of an overload. Otherwise, the ma-
chine may start suddenly, causing severe personal injury.
•
Do not apply alcohol to the rollers directly. The rollers may not dry completely, and may
contaminate the sheets.
•
Also, do not use blanket cleaner or recovery agents for printers. They may cause damage
or expansion of the rubber.
●CAUTIONS for Maintenance
CAUTIONS
•
Use only the recommended lubricating oil and grease. Other kinds of oil or grease may re-
duce the life of the machine or cause damage.
Basic Safety Precautions
Summary of Contents for CRF-362
