Horizon Fitness CRF-362, User Manual

Page: 84 / 122

If an Error Code Is Displayed
84
CRF-362
Error Code Description Causes and Solutions
102
Transport Section Cover
Open (Cover Switch S12)
Close the cover.
103
Front Cover Open
(Cover Switch S13)
Close the cover.
200
Feed Table Overlimit Error The feed section upper guide was lifted up while the feed table was rising.
13130
40201A1
Feed Section Upper Guide
Lower the feed table and then check if there is no foreign object be-
tween the feed table and the feed section upper guide.
201
Feed Table Movement Error The feed table could not move up and down.
Check if there is no object preventing the feed table from moving up
and down.
210
Misfeed A sheet was not fed. If the same error occurs repeatedly, see page
89 and follow the instructions.
211
Double Feed A double feeding occurred. If the same error occurs repeatedly, see
page 89 and follow the instructions.
212
Sheet Feed Section Jam
(Sensor B13 is on before
operation.)
A sheet was detected when is pressed. Remove the sheet.
213
The Transport Interval Is Too
Narrow
See page 70 and set the transport interval larger.
300
Register Transport Section
Jam
(The sheet did not arrive at
sensor B30.)
A jam has occurred in the register transport section. Remove the
sheet. If the same error occurs repeatedly, see page 90 and solve
the problem.
301
Register Transport Section
Jam
(Sensor B14 is on before
operation.)
A sheet was detected when is pressed.
Remove the sheet.
If this error code is displayed even though no sheets are jammed, the
sensor may be dirty. Check that the sensor works properly using the
Information - Monitor screen. (See page 39 .)
310
Too Many Sheets at Regis-
tration Transport Section
Before a sheet was detected by the B30 creasing section sheet leading
edge sensor, the next sheet was detected by the B13 double feed sen-
sor.
Remove the sheet.
If the same error occurs repeatedly, set the transport interval larger.
(See page 70 .)