Horizon Fitness CRF-362 User Manual Download Page 104

Page: 104 / 122

Cleaning Belts and Fold Rollers

104

CRF-362

Open the front cover. Wipe the

rollers using a cloth soaked with

alcohol while turning the fold

rollers using the transport hand-

wheel.

Do not apply alcohol to the rollers directly.

The rollers may not dry completely, and may

contaminate the sheets.

Attach the guide.

Install the guide by attaching it to the shaft.

Install the 2nd fold unit. And then

plug in the connector.

Install the 2nd fold unit. Be careful that the

edge of the knife for the 2nd fold unit does

not hit the guide.

Close the front cover, the register transport section cover and the fold

section cover.

13130

50202H1

Transport Handwheel

Fold Roller

13130

50202I1

Guide

Attach to this shaft.

Locking Screw

13130

502020J1

Guide

Knife

2nd Fold Unit

Locking Screws

Summary of Contents for CRF-362



























































































































Search results

Summary of Contents for CRF-362

Reviews:

Brands by name

Popular brands

Horizon Fitness CRF-362, User Manual

Search results

Summary of Contents for CRF-362

Reviews:

Brands by name

Popular brands