horiba SF-1U, Instruction Manual

Page: 59 / 60

E-VI
APPENDIX B Printer communication specifications
With the SF-1 or SF-2 connected to a dedicated printer with a dedicated cable, the results
can be printed out.
1. Connection
1.1. Printer specifications (RS-232C-compliant)
①
Pacing synchronization (asynchronous) system
②
Data bit 8bits/1character
③
Stop bit 2bits
④
Parity NON
1.2. Setting the baud rate
Set to 9600bps at the factory:
Follow the procedure below to set the baud rate of the SF main unit.
①
While holding the AUTO key, turn on the power switch. Hold down the AUTO key for
five seconds. The equipment is ready for setting the baud rate.
②
While checking the display, use the SET keys to enter the selection. The baud rate can
be selected from either 9600, 4800, 2400 and 1200 bps.
③
Turn off the power switch.
1.3. Starting up
After connecting the equipment to the printer with the dedicated communication cable,
turn on the equipment. This makes printable the results by the printer.
1.4. Dedicated printer
Use following printer:
※
Please consult about the exclusive cable of an option to our company at the time of a
necessity.
Impact Printer Type:
CBM-910II-24RxxxxA
Maker: CITIZEN SYSTEMS JAPAN CO., LTD.