horiba SF-1U, Instruction Manual

Page: 55 / 60

E-II
2. Command specifications
2.1. Equipment operating console
The equipment is operative only by the SELECT key.
Receiving the communication commands described in 2.2 below from the host computer (CPU),
the equipment controls itself according to the commands received.
It also returns the response data to the host computer.
2.2. Communication commands (CPU to SF)
Command Format Delimiter Command function description
E "E" <CR> Similar when pressing SELECT key and START key
simultaneously, equipment aborts normal measurement,
automatic measurement and automatic wetting
operation.
R "R" <CR> Similar when pressing START key for one second or
longer, equipment carries out automatic wetting
operation.
S "S1" <CR> Similar when pressing START key, equipment carries out
normal measurement.
"S0"Other thanS2
〜
10
<CR>
"S2" <CR> Automatic measurement twice Similar when pressing
START key in AUTO
mode, equipment
carries out automatic
measurement.
"S3" <CR> Automatic measurement 3times
⋮
⋮
⋮
⋮
⋮
⋮
"S10" <CR> Automatic measurement
10times
P "P730.0" <CR> Sets to minimum atmospheric pressure (730.0 hPa).
"P1000.0"
P730.0
〜
P1070.0
<CR> Sets to atmospheric pressure between minimum and
maximum.
"P1070.0" <CR> Sets to maximum atmospheric pressure (1070.0 hPa).
"P1070.1"
P1070.1 or greater <CR> If a value greater than maximum atmospheric pressure
or lower than minimum is commanded, equipment
ignores it and sets to 1013.3 hPa.
"P729.9"
Less than P730.0 <CR>
"P0.0" <CR> Equipment sets measured atmospheric pressure to itself.
(Only for SF-2)