Horiba Scientific Quanta-phi F-3029, Operation Manual

Page: 35 / 98

Quanta-
φ
rev. C (23 Apr 2010) Installation & Use
3-1
Caution:
Do not touch the surfaces of the Inte-
grating Sphere’s sample-holder. This can de-
grade its highly reflective surface. Wear clean
protective gloves when handling the interior of
the sphere.
Note:
Be sure to verify calibration for the instrument, including Xe lamp-scan
and water-Raman signal, before using the Integrating Sphere accessory.
3 : Installation & Use
Method
1
Remove the cover of the integrating sphere.
2
Choose the sample holder.
Note the two types of sample-holder:

Liquid samples in a stoppered, quartz cuvette with 1 cm path-length.

Solid samples under a quartz coverslip.
Two views of the cuvette holder for liquids.