Honeywell XYR301E, User Manual

Page: 42 / 108

XYR301E Wireless Ethernet User Manual
Page 42 April 2012
Enable Receive Diversity
Enables Radio to receive on both antenna ports
Enable Transmit Diversity Enables Radio to transmit from both antenna ports. Module does not transmit from both
ports at the same time. If needed, i.e. broadcast messages the radio will toggle
transmissions between the antenna ports.
Disable SSID broadcast.
(AP only)
This should be used to prevent unwanted eavesdroppers from detecting the radio
network System Address (SSID) by passively listening to beacon transmissions from
the Access Point. When disabled, Access Points will not transmit the System Address
openly in Beacon messages. This is particularly useful in unencrypted radio networks.
Passive Scanning (STA
only)
Selecting this item stops a Client device from sending “probe request” messages when it
is searching for an access point to connect to. Instead, the client waits for a beacon
transmission from the access point.
Background Scanning
(STA only) Enabling this option will allow a modem to periodically rescan for Access Points
keeping the connectivity page up to date with current system information. Default is off.
Note: Enabling this option will slightly increase overall radio communications.
Rescan time is fixed at 300sec (5min).
Max Distance Configure the maximum distance the radio signal is expected to travel. This allows the
modem to compensate for the flight time of messages as they pass from the transmitter
to the receiver, and as the acknowledgement messages are returned. Setting this value
larger will cause a small reduction in throughput. Setting this value too small will cause
communications problems over longer distances. Default distance is 20km
Save Changes
Save changes to non-volatile memory. Changes will not take effect until module is
reset.
Save Changes and Reset Save changes to non-volatile memory and reset module
Channel Selection
XYR301-E (900MHz 802.11)
channel selection is done by selecting the appropriate channel from the drop down list.
Only channels available for that region will be available.
Australia
USA / Canada