User Manual
XYR301E Wireless Ethernet
34-XY-25-41
Page 87
4.9
Remote Configuration
Because a module configuration is viewed and changed in a web format (which uses TCP/IP protocol), you can view or
change the configuration of a remote module via the wireless link, provided the remote module already have a wireless link
established to the local XYR301-E. To perform remote configuration, connect a PC to the local module, run Internet
Explorer and enter the IP address of the remote unit (or device name if using DNS) - the configuration page of the remote
module will be shown and changes can be made. Care must be taken if modifying the configuration of a module remotely. If
the Radio Configuration is changed, some changes made may cause loss of the radio link, and therefore the network
connection. It is advisable to determine the path of the links to the modules you wish to modify, and draw a tree diagram if
necessary. Modify the modules at the
―
leaves of your tree diagram. These will be the furthest away from your connection
point in terms of the number of radio or Ethernet links. In a simple system, this usually means modifying the Client modules
first and the Access Point last.
Summary of Contents for XYR301E
Page 2: ...Page ii April 2012 ...
Page 18: ......
