User Manual
XYR301E Wireless Ethernet
34-XY-25-41
Page 101
On the Client PC open up the CMD prompt as performed on Server PC above, followed by changing the directory path
jperf-2.0.2\bin as performed above also.
This time instead of entering in Iperf –s we enter in, Iperf –c <IP address of Server PC> -w 65535 as seen in Figure 6
Figure 6
This will run a test over the modem link to the Server PC and report back results as seen in
Figure 8.
Figure 7
Results shown in
Error! Reference source not found.
shows the Bandwidth (Throughput) of the test is 10.6Mbits/sec.
Using the Theoretical throughput calculations in Table 5 you can compare the results with the measured to give an
indication of the difference between expected and measured. Remembering that the theoretical calculations are best
case possible results.
XYR400-E
XYR401-E
XYR301-E (20Mhz)
XYR400-E
54Mbps
27Mbps
27Mbps
11Mbps
5Mbps 5Mbps 5Mbps
1Mbps
500Mbps 500Mbps 500Mbps
200Kbps
80Kbps
100Kbps
40Kbps
78Kbps
19.2Kbps
7.8Kbps
Table 5
In the command line for the Client mapping we established the Server IP address followed by the –w 65535, -w is the
window size and the maximum TCPIP window size is 65535bytes.
Summary of Contents for XYR301E
Page 2: ...Page ii April 2012 ...
Page 18: ......