XNX Universal Transmitter
Section 2 - Installation and Operation
57
Technical Manual for calibration information P/N
2104M0506)�
8� Reset any faults that appear in the transmitter’s display�
The XNX transmitter and Searchline Excel sensor are now
ready to monitor�
2.5 Configuring the XNX Universal
Transmitter
The XNX Universal Transmitter can be configured via the front
panel by using the menus available in Configure Menu� For
information on accessing and navigating the menus, see
Section
1�4�1
�
2.5.1
Configure Menu
Functions in the Configure Menu and the security levels required
to change them are explained in this table�
Symbol
Description
Security
Level
Symbol
Description
Security
Level
Select Language
1
Calibration Interval
2
Set Date & Time
1
✓
Accept New Sensor
Type
2
Set mV Sensor Type
2
Beam Block Options
2
Set mA Sensor Type
2
Path Length
2
Gas Selection
2
Unit ID
2
Range & Alarms
2
Relay Options
2
Latching/Non-
latching
2
Fieldbus Options
2
Set Units
2
Configure Security
2
mA Levels
2
Warning:
When configuring or communicating with the transmitter
using the front panel displays, resume monitoring by exiting all
menus and returning to the General Status menu manually. No time
outs are invoked.
Note:
With the exception of Inhbit Mode, gas measurement
continues in the background allowing users to navigate screens
without taking the transmitter offline.
Select Language
Available languages for the XNX transmitter are English, Italian,
French, German, Spanish, Russian, Mandarin, and Portuguese�
Figure 64. Select Language Menu
Different screens are used to display each of the eight available
languages, one language per screen� Each language screen
will appear in three languages: the selected language, Russian,
and Mandarin� To select a new display language, use the
switches to navigage through the selections� Use
✓
to make the
selection or
✖
to discard the selection and return to the previous
menu�
Summary of Contents for XNX
