Honeywell VXP, System Maintenance Manual, Page: 46 / 105

4-2 Honeywell
Maintenance
4.2.1.1 Acquisition Unit
The Acquisition Unit should be inspected per Table 4-2.
4.2.1.2 Display Unit
The Display Unit should be inspected per Table 4-3.
4.2.1.3 Strobex
The Strobex should be inspected per Table 4-4.
CAUTION:
If the Strobex is accidentally dropped or damaged, inspect in accordance
with Table 4-4.
Table 4-2. Acquisition Unit Inspection
Inspection Remedy
Inspect housing for loose screws. Tighten loose screws.
Inspect the connectors for heavy wear or
corrosion. Return the unit to Chadwick-Helmuth for
repair.
Table 4-3. Display Unit Inspection
Inspection Remedy
Inspect housing for loose screws. Tighten loose screws.
Inspect the connectors for heavy wear or
corrosion. Return the unit to Chadwick-Helmuth for
repair.
Table 4-4. Strobex Inspection
Inspection Remedy
Inspect plastic light shield for cracks,
scratches or discoloration. Return to Chadwick-Helmuth for repair.
Inspect flash tube for damage or discoloration. Return to Chadwick-Helmuth for repair.
Inspect reflector for scratches and cleanliness. Clean if dirty. If scratched, return to
Chadwick-Helmuth for repair.
Inspect trigger switch handle for condition
and proper operation. Return to Chadwick-Helmuth for repair.