Honeywell VXP, System Maintenance Manual, Page: 18 / 105

1-8 Honeywell
Introduction
In addition, various brackets, manuals, mounting assemblies and charts may be supplied with this
kit. The only other items that must be obtained are the Chadwick-Helmuth Model 11A Calibrator
and an independent 24-32 Vdc power supply for testing and calibration.
13955 Accelerometer (ICP) Converts acceleration into an
analog voltage signal. AR
610-199 Printer paper Spare paper rolls for thermal
printer. 4
610-527 Carrying case Allows for all-in-one portability.
Protects when not in use. 1
3300, 10444,
12803, 4270A Reflective tape,
patches and target
sets Used when operating the Strobex
and FasTrak. 1
Table 1-2. VXP System Cables
Part No. Nomenclature Purpose Quantity
10185 Cable, Photocell Connects Photocell to AU. AR
10808 Cable, Magnetic
Pickup Connects magnetic pickup to
AU. 1
10813 Cable, Power Supply Connects the AU to the aircraft
power supply. 1
11210 Cable, Velocimeter Connects Velocimeter to AU. AR
13279 Cable, FasTrak Connects the FasTrak to AU. 1
15371
or
17317 Cable, VXP AU to
DU Connects signals between the
AU and the DU and the printer. 1
15384 Cable, ICP
Accelerometer Connects ICP Accelerometer to
AU. AR
Table 1-1. VXP Major Components
Part No. Nomenclature Purpose Quantity