Honeywell VXP, System Maintenance Manual, Page: 44 / 105

3-8 Honeywell
System Operations
5. Enter the ID number of the aircraft or select the desired ID number from the drop
down menu, and click on
OK (or press the Enter key).
6. The Select Procedure window of the AP will display.
7. Pull down the File menu and select the AU printer or click on the Print icon on the
left side of the display.
8. Select the desired log to be printed. The log file will then be printed on the serial
printer.
Log files or the database may be cleared as follows:
1. Apply power to the system.
2. After the main desktop appears on the DU, launch the VXP DP by double clicking
on (or touching twice in rapid succession) the VXP icon
. The Start Up dialog
box will appear.
3. Establish communication with the AU by clicking on the OK button or pressing the
Enter key (the “ Connect To AU ” option is selected by default).
4. Enter the ID number of the aircraft or select the desired ID number from the drop
down menu, and click on
OK (or press the Enter key).
5. The Select Procedure window of the AP will display.
6. Drop down the Test AU menu and select Clear AU Logs. The Clear Logs window
will appear, as shown in Figure 3-6
Figure 3-6. Clear Logs Window
7. Select the option you wish, and click on the Clear button to clear the logs from
memory. You may also press Cancel to avoid clearing any of the logs from memory.