Honeywell Voyager 1400g Series, User Manual, Page: 61 / 216

3 - 11
Use shorter delays in applications where repetitive bar code scanning is
required. Reread Delay only works when in
Presentation Mode (see page 3-7).
Default = Medium.
User-Specified Reread Delay
If you want to set your own length for the reread delay, scan the bar code below,
then set the delay (from 0-30,000 milliseconds) by scanning digits from the
inside back cover, then scanning
Save .
Centering
Use Centering to narrow the scanner’s field of view to make sure that when the
scanner is hand-held, it reads only those bar codes intended by the user. For
instance, if multiple codes are placed closely together, centering will insure that
only the desired codes are read.
Note: To adjust centering when the scanner is in the stand, see Presentation
Centering (page 3-8).
If a bar code is not touched by a predefined window, it will not be decoded or
output by the scanner. If centering is turned on by scanning
Centering On , the
scanner only reads codes that pass through the centering window you specify
using the
Top of Centering Window, Bottom of Centering Window, Left , and
Right of Centering Window bar codes.
Short (500 ms)
* Medium (750 ms)
Long (1000 ms)
Extra Long (2000 ms)
User-Specified Reread Delay