manualshive.com logo in svg

Honeywell Voyager 1400g Series, User Manual, Page: 40 / 216

Share
Download
Honeywell Voyager 1400g Series User Manual Download Page 40

2 - 16

Regular 

is used when you normally have the Caps Lock key off.

Caps Lock

 

is used when you normally have the Caps Lock key on.

Shift Lock

 

is used when you normally have the Shift Lock key on (not common 

to U.S. keyboards).

Automatic Caps Lock 

is used if you change the Caps Lock key on and off.   

The software tracks and reflects if you have Caps Lock on or off . This selection 
can only be used with systems that have an LED that notes the Caps Lock sta-
tus (AT keyboards).

Autocaps via NumLock

 

bar code should be scanned in countries (e.g., Ger-

many, France) where the Caps Lock key cannot be used to toggle Caps Lock.  
The NumLock option works similarly to the regular Autocaps, but uses the Num-
Lock key to retrieve the current state of the Caps Lock.

* Regular

Caps Lock 

Shift Lock

Automatic Caps Lock 

Autocaps via NumLock 

Summary of Contents for Voyager 1400g Series

























































































































































































































Reviews:

No comments