VISIONPRO® 8000 SMART THERMOSTAT
41
33-00096—04
3.
Touch Done to save and exit.
• On: Fan is always on.
• Auto: Fan runs only when heating or cooling
system is on.
• Circ: Fan runs randomly, about 35% of the time
(residential only).
• Follow Schedule: Fan controlled by program. This
option may not appear, depending on how your fan
was programmed.
Fig. 34.
NOTE:
In commercial use, touch Auto or On to temporar-
ily override the programmed fan schedule.
Setting System Mode
1.
Touch SYSTEM to display system settings.
Fig. 35.
2.
Touch desired option
• Heat: Controls only the heating system.
• Cool: Controls only the cooling system.
• Off: Heating/cooling systems are off.
• Auto: Selects heating or cooling depending on the
indoor temperature.
• Em Heat (heat pumps with aux. heat): Controls
auxiliary/emergency heat. Compressor is locked
out.
Fig. 36.
3.
Touch Done to save and exit.
NOTE:
The Auto and Em Heat system settings may not
appear, depending on how your thermostat was
installed.
Preset Energy-Saving Schedules
These default Energy Saver settings can reduce expenses.
* Period 2 is cancelled by default. If you activate it, the val-
ues shown above are default settings.
Adjusting Program Schedules
1.
Touch MENU.
Fig. 37.
2.
Select Edit Schedule to display Use Scheduling
Assistant?
Fig. 38.
• Touch Yes to create a schedule by answering
simple questions.
• Touch No to manually create a program schedule.
MCR34097
On
Auto
Circ
MCR34098
MCR34099
Heat
Cool
Auto
Off
Table 3. Residential Use Default Schedule.
Period
Start
Time
Heat
(Mon-
Fri)
Cool
(Mon-
Fri)
Heat
(Sat-
Sun)
Cool
(Sat-
Sun)
Wake
6:00 am
70°
78°
70°
78°
Leave
8:00 am
62°
85°
62°
85°
Return
6:00 pm
70°
78°
70°
78°
Sleep
10:00 pm 62°
82°
62°
82°
Table 4. Commercial Use Default Schedule.
Period
Start
Time
Heat
Cool
Fan
Occupied 1
8:00 am
70°
75°
On
Unoccupied 1
10:00 pm 55°
85°
Auto
Occupied 2*
12:00 am 70°
75°
On
Unoccupied 2*
12:00 am 55°
85°
Auto
MCR34100
MCR34101
Edit Schedule
View Schedule
