manualshive.com logo in svg

Honeywell VisionPRO 8000 Series, Product Data

Share
Download
Honeywell VisionPRO 8000 Series Product Data Download Page 24

VISIONPRO® 8000 SMART THERMOSTAT

33-00096—04

24

406

Max. Heat Recovery 
Ramp Rate

Off
1° F/hr to 20° F/hr

8° F/hr

Commercial

Off: The heating system will begin recovery at the 
time that is scheduled.

When a Maximum Recovery Ramp Rate is set, the 
thermostat will begin recovery early to ensure the 
temperature is reached at the scheduled time.

Set a Maximum Recovery Ramp Rate based on the 
rate that the heating system can recover at for a mild 
day in your region. Default setting is 8° F / hour.

Set an Outdoor Temperature that is representative of 
a mild day in your region to be associated with the 
Maximum Recovery Ramp Rate. The thermostat will 
begin recovery at the optimal time based on a 
calculated ramp rate, allowing the system to recover 
on time and save energy during changing outdoor 
conditions.

During recovery, the setpoint changes at a rate in 
degrees per hour depending on the outdoor 
temperature.

406

Max. Heat Recovery 
Outdoor Temp

Off
-20° F to 100° F

40° F

Commercial

Off: The heating system will begin recovery at the 
time that is scheduled.

When a Maximum Recovery Ramp Rate is set, the 
thermostat will begin recovery early to ensure the 
temperature is reached at the scheduled time.

Set a Maximum Recovery Ramp Rate based on the 
rate that the heating system can recover at for a mild 
day in your region. Default setting is 8° F / hour.

Set an Outdoor Temperature that is representative of 
a mild day in your region to be associated with the 
Maximum Recovery Ramp Rate. The thermostat will 
begin recovery at the optimal time based on a 
calculated ramp rate, allowing the system to recover 
on time and save energy during changing outdoor 
conditions.

During recovery, the setpoint changes at a rate in 
degrees per hour depending on the outdoor 
temperature.

Table 2. Installer Setup (ISU) Table. (Continued)

ISU 

Number

Installer Setup 

Name

Settings

Default

Residential, 

Commercial 

or Both

Notes

Summary of Contents for VisionPRO 8000 Series





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands