Honeywell Thor VM3A User Manual Download Page 30

Page: 30 / 66

Thor VM3A Vehicle-Mounted Computer

Orange Key LED

System LEDs

SYS (System Status) LED

UPS Status LED

The behavior of the UPS LED depends if external power is connected or not.

External Power Present

LED Behavior

Status

Solid Red

•

Indicates the Orange Key modifier key is active. Orange Key
modes in invoked for the next keypress only.

•

Pressing the Orange key a second time exits this modifier mode
and turns off the LED.

•

Pressing the Orange key followed by the Shift key places the
system in Caps Lock mode.

•

To exit Caps Lock mode, press the Shift key again.

Off

Neither Orange Key or Caps Lock mode is invoked.

SYS (System Status) LED

UPS (Uninterruptible Power Supply) LED

LED Behavior

System State

Solid White

•

On, but in Sleep Mode

Blinking White

•

CPU temperature is less than 0°C. The unit must be moved to an
environment warmer than 0°C before it will boot up.

Off

•

Off

LED Behavior

Status

Solid Green

UPS is more than 50% charged

Solid Amber

UPS is less than 50% charged

Blinking Red

Battery error

Summary of Contents for Thor VM3A



































































Search results

Summary of Contents for Thor VM3A

Reviews:

Related manuals for Thor VM3A

Brands by name

Popular brands

Honeywell Thor VM3A, User Manual

Search results

Summary of Contents for Thor VM3A

Reviews:

Related manuals for Thor VM3A

Brands by name

Popular brands