Honeywell Thor VM3A User Manual Download Page 13 | Manualshive

Page: 13 / 66

background image

CHAPTER

1

Thor VM3A Vehicle-Mounted Computer

1

ABOUT THE COMPUTER FEATURES

This chapter introduces the Thor VM3A Vehicle-Mounted Computer. Use this
chapter to learn about the basic computer features and functions.

About the Thor VM3A Vehicle-Mounted Computer

The Thor VM3A Vehicle-Mounted Computer (VMC) is a rugged, vehicle mounted
computer powered by Android and capable of wireless data communications from
a fork-lift truck or any properly configured vehicle. VM3A is built on the Mobility
Edge™ platform and can deliver real-time connectivity, advanced data capture, and
future-proof investment protection. The computer is equipped for fast Wi-Fi
connectivity with a WLAN 802.11 a/b/g/n/ac radio and Bluetooth (v5.0)
technology that includes Bluetooth Low Energy (BLE) support.

The computer is designed for use with a vehicle dock. The dock installs in the
vehicle, connects to vehicle power, and provides conditioned input power for the
computer. The VM3A is designed to be easily removed from the dock and be moved
from one vehicle dock to another.

VM3A contains a UPS battery which, when fully charged, can power the computer
for a minimum of 15 minutes for when the computer is not attached to a dock, is
being switched to another dock, or the vehicle power is interrupted.

Caution: Before shipping the Thor VM3A, be sure to

Disconnect the UPS

.

«
...
11
12
13
14
15
...
»

Summary of Contents for Thor VM3A



































































Reviews:

No comments

Related manuals for Thor VM3A

Brand: Panasonic Pages: 2

CYRC50U - UNIVERSAL REAR-VIEW CAMERA

Brand: Panasonic Pages: 20

Brand: Panasonic Pages: 12

Brand: Metra Electronics Pages: 8

Electra 225 1965

Brand: Buick Pages: 914

Brand: Xpresskit Pages: 18

Brand: Thule Pages: 3

Brand: ENSONIQ Pages: 249

Brand: POOL-LINE Pages: 2

Brand: Enduro Pages: 52

Crossland X 2017

Brand: Vauxhall Pages: 245

Brand: Kleinn Pages: 8

Brand: WABCO Pages: 224

Brand: Summit Racing Pages: 11

Brand: Calix Pages: 4

Brand: Ford Pages: 4378

Brand: Toyota Pages: 549

EPS-LD SafePark

Brand: Tobe Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands