84(96)
Commissioning
Honeywell
Honeywell
Honeywell
Honeywell
8
9
Run the start-up tests without the motor being connected to the process, if possible. If this is not
possible, secure the safety of each test prior to running it. Inform your co-workers of the tests.
a)
Switch off the supply voltage and wait up until the drive has stopped
as advised at Chapter 8.1,
step 5
.
b)
Connect the motor cable to the motor and to the motor cable terminals of the frequency converter.
c)
See to that all Start/Stop switches are in Stop positions.
d)
Switch the mains ON
e)
Repeat test
8A
or
8B
.
10
Connect the motor to the process (if the start-up test was run without the motor being connected)
a)
Before running the tests, make sure that this can be done safely.
b)
Inform your co-workers of the tests.
c)
Repeat test
8A
or
8B
.