Honeywell HVAC03C5, User Manual

Page: 60 / 96

60(96)
Control Keypad
Honeywell
Honeywell Honeywell
Honeywell
7
7.4.2 Parameter menu (P2)
Parameters are the way of conveying the commands of the user to the frequency converter. The
parameter values can be edited by entering the
Parameter Menu
from the
Main Menu
when the
location indication
P2
is visible on the display. The value editing procedure is presented in Figure 7-
6.
Push the
Menu button right
once to move into the
Parameter Group Menu (G#)
. Locate the
parameter group desired by using the
Browser buttons
and push the
Menu button right
again to
enter the group and its parameters. Use again the
Browser buttons
to find the parameter
(P#)
you
want to edit. Pushing the
Menu button right
takes you to the edit mode. As a sign of this, the
parameter value starts to blink. You can now change the value in two different manners:
1
Just set the new desired value with the
Browser buttons
and confirm the change with the
Enter
button
. Consequently, the blinking stops and the new value is visible in the value field.
2
Push the
Menu button right
once again. Now you will be able to edit the value digit by digit.
This editing manner may come in handy, when a relatively greater or smaller value than that
on the display is desired. Confirm the change with the
Enter button
.
The value will not change unless the Enter button is pushed.
Pressing the
Menu button left
takes you back to the previous menu.
Several parameters are locked, i.e. not editable, when the drive is in RUN status. The frequency
converter must be stopped in order to edit these parameters.
The parameters values can also be locked using the function in menu
S6
(see Chapter 7.4.7.2).
You can return to the
Main menu
anytime by pressing the
Menu button left
for 1—2 seconds.
The basic parameters are listed in Chapter 8.3. You will find the complete parameter lists and
descriptions in the HVAC and Multi-Control Application manuals.
Once in the last parameter of a parameter group, you can move directly to the first parameter of that
group by pushing the
Browser button up
.