Honeywell HVAC03C5, User Manual

Page: 70 / 96

70(96)
Control Keypad
Honeywell
Honeywell Honeywell
Honeywell
7
7.4.7.1 Copy parameters
The Copy parameters submenu
(S6.3) is
located under the
System menu.
The Honeywell NX frequency converter features a possibility for the user to store and load two
customised parameter sets (all parameters included in the application, not the system menu
parameters) and to load back the factory default parameter values.
Parameter sets (S6.3.1)
On
Parameter sets
page
(S6.3.1)
, push the
Menu button right
to enter the
Edit menu
. You can store
or load two customised parameter sets or load back the factory defaults. Confirm with the
Enter
button
. Wait, until
8 (=OK)
appears on the display.
Figure 7-10. Storing and loading of parameter sets
7.4.7.2 Security
The Security submenu
(S6.5)
under the system menu has a function that allows the user to prohibit
changes to the parameters.
Parameter lock (P6.5.2)
If the parameter lock is activated the parameter values cannot be edited.
NOTE: This function does not prevent unauthorised editing of parameter values.
Enter the edit mode by pushing the
Menu button right
. Use the
Browser buttons
to change the
parameter lock status (
0
= changes enabled,
1
= changes disabled). Accept the change with the
Enter button
or return to the previous level with the
Menu button left
.
enter
STOP I/O term
READY
STOP I/O term
READY
nxlk21.fh8
STOP I/O term
READY
STOP I/O term
READY