Honeywell
49
Boot up the DVR, and input the user name and password.
In the main menu, select
Setting
Pan/Tilt/Zoom
. The interface is shown
as in
Figure 4-27
. Here you can set the following items:
Channel: Select the channel
connected with the speed dome video
port.
Protocol: Select the corresponding PTZ protocol (such as PELCOD).
Address:
Identical to the device address set in the speed dome.
Default address is 1.
Baud rate: Select corresponding baud rate. 2400 for Pelco-D
protocol.
Data bits: Select corresponding data bits. Default value is 8.
Stop bits: Select corresponding stop bits. Default value is 1.
Parity: There are three options: Odd/Even/None. The default value
is None.
Figure 4-27 PTZ Setup Menu
After completing all the settings click
Save
.
In the single window display (View 1) mode, right-click to open the interface
shown in
Figure 4-28
(by clicking
Fn
in the front panel or in the remote
controller will cause a menu to appear with only Pan/Tilt/Zoom and Color
Setting options). .
Summary of Contents for HSVR-04
