Honeywell HSVR-04 User Manual Download

Page: 135 / 161

Honeywell

127

If you enabled this function, the system can send out email to
alert you when alarms occur and end.

Tour

Display video in local monitor window by tour. If there are
record channels selected, only the record channels will be
displayed in the tour.

PTZ
Activation

Here you can set PTZ movement when alarm occurs. Such as
go to preset x when there is an alarm.

Copy

It is a menu shortcut button. You can copy current channel
setup to one or more (all) channels.

Save

You can click the save button after you complete setup for one
channel, or you can complete the whole setup and then click
the save button.

Refresh

Click this button to get the device’s latest configuration
information.

PTZ

PTZ interface is shown in

Figure 6-41

Please note that before operation, you have set the speed dome address,
and that you verify that the DVR and speed dome connection is stable.

Figure 6-41 The PTZ Setup Menu

Summary of Contents for HSVR-04

































































































































































Search results

Summary of Contents for HSVR-04

Reviews:

Related manuals for HSVR-04

Brands by name

Popular brands

Honeywell HSVR-04, User Manual

Search results

Summary of Contents for HSVR-04

Reviews:

Related manuals for HSVR-04

Brands by name

Popular brands