Honeywell
121
Parameter Function
NAS enable
Please select network storage protocol and then
enable NAS function.
Server IP
Input remote storage server IP address.
Port
Input Remote storage server-port number.
User Name
Log in user account.
File length
The file length you upload to the FTP.
When the setup is larger than the actual file length,
the system will upload the whole file. When the
setup is smaller than the actual file length, the
system only uploads the set length and auto ignores
the remaining section. When interval value is 0, the
system uploads all corresponding files.
Password
The password you need to log in the server.
Remote Path
Remote storage file path.
Save
You can click
Save
after you complete setup for one
channel, or you can complete the whole setup and
then click the save button.
Refresh
Click this button to get device latest configuration
information.
NTP
The NTP interface is shown in
Figure 6-37
.
Here you can realize network time synchronization. Please enable current
function and then input server IP, port number, time zone and update
interval.
Summary of Contents for HSVR-04
