Web Client Operation
128
Please refer to the following sheet for detailed information.
Parameter
Function
Channel
You can select monitor channel from the dropdown list. .
Protocol
Select the corresponding dome protocol (such as PELCOD),
Address
Set corresponding dome address. Default value is 1. Please
note your setup here shall comply with your dome address;
otherwise you can not control the speed dome.
Baud Rate
Select the dome baud rate. Default setup is 9600.
Data Bit
Default setup is 8. Please set according to the speed dome dial
switch setup.
Stop bit
Default setup is 1. Please set according to the speed dome dial
switch setup.
Parity
Default setup is none. Please set according to the speed dome
dial switch setup.
Save
You can click the save button after you complete setup for one
channel, or you can complete the whole setup and then click
the save button.
Refresh
Click this button to get the device’s latest configuration
information.
Default & Backup
Default: Restore the factory default settings. You can select corresponding
items.
Backup: Export current configuration to local PC or import configuration
from current PC.
Please refer to
Figure 6-42
.
Please note that the system cannot restore some information such as the
network IP address.
Summary of Contents for HSVR-04
