Honeywell HON 512, User And Maintenance Manual

Page: 49 / 208

Transport, installation and start-up
HON 512 with HON 650 pilot user manual 49
Proceed as follows:
Figure Step Description
1 Connect the electrical displacement
transducer (optional) to position (1) on the
actuator assembly as per the technical
specifications in the
appendix (see page
152) in these operating instructions.
Conduct a final inspection to check whether the following criteria are met:
▪
All threaded joints on the connection lines have been checked to ensure that they have
a secure fit.
▪
All electrical connections are securely fastened / clamped and fused.
If … then …
at least one criterion is not met you should correct the error before proceeding
with the next task.
all criteria are met you may proceed with the next task.
Proceed as follows:
Checking the system for leaks (see page 50)
Final checks
Next task