Honeywell HercuLine 10260S, Installation, Operation And Maintenance Manual

Page: 29 / 122

3. Installation - Mechanical Installation
Revision 5 10260S HercuLine® Actuator Installation, Operation and Maintenance Manual 19
7/07
Turnbuckle Linkage Kits (See Section 8 for available Kit numbers)
Turnbuckle linkage kits are available from Honeywell and are used where short lengths are required. The
lengths range from 12 to 24 inches and refer to the rod end center-to-center distance. These kits include the
turnbuckle, load rod end (left-hand thread), connecting rods and locking nuts. See Figure 9. The actuator
rod end (right-hand thread), nut and bolt are supplied with the actuator. The nut and bolt needed to connect
the rod end to the load are supplied by the customer. Kits can be ordered with the Actuator via Table VI of
the Model Selection Guide or separately as identified in section 8 of this manual.
Rod end, nut and bolt are
supplied with the actuator
1/2"-20 right-hand threads -20 left-hand threads
Custom er supplied nut and bolt
12 to 24 inches
a/n 23201
1/2"
Figure 9 Turnbuckle Linkage Kit
Pipe Linkage Kits (See Section 8 for available Kit numbers)
Pipe linkage kits are available from Honeywell and can be used for linkage lengths from 24 to 120 inches
(60 to 305 cm). The kits include the mechanical pipe couplings, load rod end (left-hand thread), connecting
rods and locking nuts. See Figure 10 Pipe Leakage Kit
. The actuator rod end (right-hand thread), nut and bolt are supplied with the actuator. The customer must
supply a piece of schedule 40 pipe * (both ends with right-hand NP threads) and a nut and bolt to connect
the rod end to the load. Pipe linkage kits can be ordered with the Actuator using Table VI of the Model
Selection Guide or separately as identified in Section 8 in this manual.
Rod end, nut and bolt are
supplied with the actuator
1/2"-20 right-hand threads 1/2"-20 left-hand threads
Customer supplied nut and bolt
24 to 120 inches
Custom er supplied pipe*
* cut to size
with
standard NPT both ends a/n 23202
* Pipe length = Overall linkage length minus (-) 17 inches (43 cm).
Figure 10 Pipe Leakage Kit