Honeywell AlarmNet IGSMHS, Installation And Setup Manual, Page: 36 / 64

IGSMHS Installation and Setup Guide
3-18
PROMPTS
ZONE
TRIG.
4204/
2-4204
ENTRY OPTIONS DESCRIPTION
49
Zn5 Trigger Type
(V+)_

 (EOLR)

(V+)
 (V–)
Selects the triggering method for this zone
input. Press the [space] key to scroll through
choices.
UL: V+ must be set as inverted and V– as
non-inverted.
50
Invert Zn5 Y/N
(N)_

[Y], [N] Inverts the alarm and normal states of the zone
5 trigger; otherwise uses normal input signal.
51
Restore Zn5 Y/N
(Y)_

2-
4204
only
[Y], [N] Enables restore reporting for zone 5.
UL: Must be set to “Y.”
52 Delay Zn5 (secs)
(00)_
 2-
4204
only
[01-15]
[00] = no
delay
Defines the reporting delay in seconds for
zone 5.
UL: Must be set to 00.
53
Rpt Zn5 ONLY if
Armed (N)_
 2-
4204
only
[Y], [N]
Reports alarms on zone 5 ONLY if the
conditional zone (zone 7 in zone trigger mode;
zone 8 in 2-4204 mode) is triggered (armed).
If [N], always reports alarms on zone 5.
54 Enable Zn6 Y/N
(N)_
4204
only
[Y], [N]
Enables alarm reporting for zone 6.
If [N], skip to Prompt 60: "Enable Zn7."
55
Zn6 Trigger Type
(V+)_
 4204
only
 (EOLR)

(V+)

(V–)
Selects the triggering method for this zone
input. Press the [space] key to scroll through
choices.
UL: V+ must be set as inverted and V– as
non-inverted.
56
Invert Zn6 Y/N
(N)_
 4204
only
[Y], [N] Inverts the alarm and normal states of the zone
6 trigger; otherwise uses normal input signal.
57
Restore Zn6 Y/N
(Y)_
 
[Y], [N] Enables restore reporting for zone 6.
UL: Must be set to “Y.”
58 Delay Zn6 (secs)
(00)_
 
[01-15]
[00] = no
delay Defines the reporting delay in seconds for
zone 6.
UL: Must be set to 00.
59
Rpt Zn6 ONLY if
Armed (N)_
 
[Y], [N]
Reports alarms on zone 6 ONLY if the
conditional zone (zone 7 in zone trigger mode;
zone 4 in 4204 mode; zone 8 in 2-4204 mode) is
triggered (armed).
If [N], always reports alarms on zone 6.
60
Enable Zn7 Y/N
(N)_
4204
only
[Y], [N] Enables alarm reporting for zone 7.
If [N], skip to Prompt 68: "Use DHCP."
61
Zn7 Trigger Type
(V+)_
 4204
only

(EOLR)
 (V+)

(V–)
Selects the triggering method for this zone
input. Press the [space] key to scroll through
choices.
UL: V+ must be set as inverted and V– as
non-inverted.
62 Invert Zn7 Y/N
(N)_
 4204
only
[Y], [N] Inverts the alarm and normal states of the zone
7 trigger; otherwise uses normal input signal.