7810iR Internet Communication Module Installation and Setup Guide
6-12
Message Definition
Applies
to
cccc 5555 5551 7
AC Loss
7620ULF only
cccc 5555 5553 7
AC Loss Restore
7620ULF only
Status Channel = 8 (Alarm with low battery (older 7620 radio only))
NOTES:
Each channel that displays these message types corresponds to a particular type
of event. Because there are eight channels, it is possible for multiple events to be reported in
multiple channels in only one message.
(Example: “cccc 1553 5155 8”
indicates an alarm on zone 1, a restore on zone 4
and
a low
battery.)
Message Definition
Applies
to
cccc 5555 5555 8
Low Battery Massage
7620 or
7620ULF only
cccc zzzz zzzz 8
Low Battery with Reported Alarms
Alarm messages are identical to those reported when the
status channel is a “7”. The “8” only indicates that a low
battery condition is also present. (Please refer to the
description of alarm messages for status channel of “7”.)
For these radios, the low battery message will be
repeated when other trouble conditions are reported
(where the status channel = ‘6’). The low battery
message will be sent directly following the trouble
message.
In addition, the low battery message will also be sent
when any alarm or restore is reported.
These radios do not have a specific Low Battery Restore
message. After a low battery condition is received, a
Low Battery Restore is implied when the next alarm or
Open/Close message is received with a ‘7’ in the ninth
channel rather than an ‘8’.
7620 or
7620ULF only
Status Channel = 9 (Installer generated test message)
Message Definition
Applies
to
cccc 5555 5555 9
System Test Message
Manually triggered test from the radio.
Test signal generated by an AlarmNet Network
Technician for a specific subscriber.
24-hour Network Acknowledgement of Subscriber Status
messages.
Note: for older 7620 and 7620ULF radios, Zone alarms
may also be sent at the same time as a test message.
These messages will be in the identical formats to those
alarms shown for Status Channel 5 or 8, except that the
status channel will be a 9.
All
Summary of Contents for AlarmNet 7810iR
