manualshive.com logo in svg

Honeywell AlarmNet 7810iR, Installation And Setup Gude, Page: 30 / 64

Share
Download
Honeywell AlarmNet 7810iR Installation And Setup Gude Download Page 30

7810iR Internet Communication Module Installation and Setup Guide 

5-6 

685 Automation Mode 

When configured for 685 Automation Mode, subscriber alarm messages received on the 
10BaseT connection are routed directly to Automation equipment.  Using an RS232 serial 
interface, the 7810iR communicates with Automation equipment in the same way as a 685 
Digital Alarm Receiver.   

New alarms are briefly displayed in the 7810iR New Alarm window with no audible alert.  
When the Automation equipment receives and acknowledges the alarm message, the 7810iR 
automatically moves the current message into the Alarm History window. The next alarm in 
the New Alarm buffer will be displayed in the New Alarm window.   

If the Fail to Manual option is selected during the 7810iR programming, the 7810iR will 
revert to Manual Mode when communication with the Automation system is lost.  When 
communication is restored, the 7810iR will send up to 100 unreported messages to the 
automation equipment. 

Both the New Alarm window and the Alarm History window are first-in, first-out (FIFO) 
buffers that are limited to 100 entries.  Once 100 messages have been received in the Alarm 
History buffer, the next message received will push the oldest alarm off the list.  There is no 
method to save or archive messages in these buffers. 

If the Fail to Manual option is not selected, a loss of communications between the 7810iR and 
Automation will block the AlarmNet connection.  This makes all incoming messages from 
AlarmNet undeliverable or bounced.  In this condition, AlarmNet will deliver all subscribers 
message traffic to the Backup CS immediately. 

Alarm Sequence in 685 Automation Mode 

Action Screen 

Display 

1.  685 Automation “Home” screen. 

 

2.  New alarm received. 

 

 
 
 
 
 

Summary of Contents for AlarmNet 7810iR

































































Reviews:

No comments