Honeywell ACM 150, Manual To Installation, Operation, And Maintenance

Page: 86 / 156

ACM 150
86
Figure 50. Configuration key
Reviewing and changing the order of scan
Until you login with an access code, you can only review but not change the order of
scan. After you login, you may edit the sequence and enable or disable points.
When editing Order of Scan follow the steps in
Table 3 .
Figure 51. Editing the order of scan
Table 3. Order of scan editing steps
1 Decide on the scan sequence you want to use before you make any
changes.
Note that points may be scanned in any sequence. If you want the ACM 150
monitor to spend more time scanning one or more critical points, you can repeat
the point(s) in the sequence. Order of Scan allows a maximum sequence of 87
entries.