Honeywell 7600BP-112-B6EE - Hand Held Products Dolphin 7600 User Manual Download

Page: 66 / 144

6 - 2

Personal Tab

To access the Personal tab, go to

Start

Settings

. The screen opens displaying the Personal tab.

Note: Personal settings are stored in RAM memory. They are replaced by system defaults after each hard reset.

For more information about resets, see

Soft Reset (Warm Boot)

on page

3-25.

Icon

Description

For more information…

Buttons

Program the side buttons to perform specific tasks.

See

Buttons

on page

6-3.

Input

Customizes the SIP.

See

Input

on page

6-4.

Lock

Password protect the terminal to limit access to the terminal.

Menus

Customizes what appears on the Start menu.

See

Menus

on page

6-5.

Owner Information

Enter your contact information.
This information will appear on the Today screen.

Phone

When the GSM radio is enabled, tap this icon to set
up user parameters.

See

Setup Options

on page

8-10.

Sounds &
Notifications

Set the sound volume, enables and disables sounds for specific actions, and sets
sound parameters for system notifications.

Today

Customize the look and the information displayed on the Today screen.

Summary of Contents for 7600BP-112-B6EE - Hand Held Products Dolphin 7600

















































































































































Search results

Summary of Contents for 7600BP-112-B6EE - Hand Held Products Dolphin 7600

Reviews:

Related manuals for 7600BP-112-B6EE - Hand Held Products Dolphin 7600

Brands by name

Popular brands

Honeywell 7600BP-112-B6EE - Hand Held Products Dolphin 7600, User Manual

Search results

Summary of Contents for 7600BP-112-B6EE - Hand Held Products Dolphin 7600

Reviews:

Related manuals for 7600BP-112-B6EE - Hand Held Products Dolphin 7600

Brands by name

Popular brands