Honeywell 7600BP-112-B6EE - Hand Held Products Dolphin 7600 User Manual Download

Page: 24 / 144

3 - 6

Wipe the screen with a clean, non-abrasive, lint-free cloth.

Note:

Use ionized air, if available, to blow additional dirt or particles off the touch panel.

Installing Your Screen Protector

When installing a new screen protector, use a flat plastic card (such as a credit card) to apply the screen
protector smoothly and remove any air bubbles.

Note:

If you have one, use the small plastic squeegees designed for touch panels.

Press the

Blue

Backlight

keys to put the terminal in

Suspend Mode

(see page 3-26).

Summary of Contents for 7600BP-112-B6EE - Hand Held Products Dolphin 7600

















































































































































Search results

Summary of Contents for 7600BP-112-B6EE - Hand Held Products Dolphin 7600

Reviews:

Related manuals for 7600BP-112-B6EE - Hand Held Products Dolphin 7600

Brands by name

Popular brands

Honeywell 7600BP-112-B6EE - Hand Held Products Dolphin 7600, User Manual

Search results

Summary of Contents for 7600BP-112-B6EE - Hand Held Products Dolphin 7600

Reviews:

Related manuals for 7600BP-112-B6EE - Hand Held Products Dolphin 7600

Brands by name

Popular brands