manualshive.com logo in svg

Honeywell 7600BP-112-B6EE - Hand Held Products Dolphin 7600, User Manual

Share
Download
Honeywell 7600BP-112-B6EE - Hand Held Products Dolphin 7600 User Manual Download Page 77

6 - 13

Remove Programs

Remove Programs enables you to remove programs installed on the terminal. Use this setting to 
troubleshoot when you receive messages that the terminal is out of memory. The programs removed are 
removed from RAM memory. 

Any program (usually CAB or DLL files) stored in the Autoinstall folder (My Device > IPSM > Autoinstall) 
will re-install after the next hard reset. For information about the hard reset process, see 

Hard Reset (Cold 

Boot)

 on page 

3-25.

1.

Tap 

Remove Programs

. In the list, select the program you want to remove. 

2.

Tap 

Remove

. The following message appears: 

3.

Tap 

Yes

. Wait while the program is removed. 

4.

Verify that the program no longer appears in the list.

Summary of Contents for 7600BP-112-B6EE - Hand Held Products Dolphin 7600

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands