Honeywell 7600BP-112-B6EE - Hand Held Products Dolphin 7600 User Manual Download

Page: 126 / 144

12 - 2

Back Panel

Power Supply Connector

Attach the power supply to this connector. The universal power supply accepts input voltages
between 90-265 volts.

Power Switch

Toggle the power switch to turn the charger on and off.

Supplying Power

Use the power adapter cable that comes with the charger so that the input voltage is adjusted
appropriately.

Locate the AC power adapter cable and plug it into the power source.

Connect the power cable to the power adapter.

Connect the power cable to the power supply connector on the back of the charger.

Press the power switch to the ON position.

The device performs the following power-up diagnostic routine for each slot indicated by the Status
LEDs:

•

All ON Orange

•

delay (500ms)

•

All ON Red

•

delay (500ms)

•

All ON Green

•

delay (500ms)

•

All OFF

Power Supply Connector

Power Switch

Summary of Contents for 7600BP-112-B6EE - Hand Held Products Dolphin 7600

















































































































































Search results

Summary of Contents for 7600BP-112-B6EE - Hand Held Products Dolphin 7600

Reviews:

Related manuals for 7600BP-112-B6EE - Hand Held Products Dolphin 7600

Brands by name

Popular brands

Honeywell 7600BP-112-B6EE - Hand Held Products Dolphin 7600, User Manual

Search results

Summary of Contents for 7600BP-112-B6EE - Hand Held Products Dolphin 7600

Reviews:

Related manuals for 7600BP-112-B6EE - Hand Held Products Dolphin 7600

Brands by name

Popular brands