Honeywell 4800dr - Document Camera, Barcode Manual

Page: 55 / 146

6 - 7
Interleaved 2 of 5
< Default All Interleaved 2 of 5 Settings >
Interleaved 2 of 5
Check Digit
No Check Digit indicates that the document reader reads and transmits barcode data with or without a
check digit.
When Check Digit is set to Validate, but Don’t Transmit , the unit only reads Interleaved 2 of 5 barcodes
printed with a check digit, but will not transmit the check digit with the scanned data.
When Check Digit is set to Validate and Transmit , the document reader only reads Interleaved 2 of 5
barcodes printed with a check digit, and will transmit this digit at the end of the scanned data. Default =
No Check Digit.
Interleaved 2 of 5 Message Length
Scan the barcodes below to change the message length. Refer to Message Length Description (page 6-
2) for additional information. Minimum and Maximum lengths = 2-80. Minimum Default = 4, Maximum
Default = 80.
* On
Off
Validate, but Don’t Transmit
* No Check Digit
Validate and Transmit
Minimum Message Length
Maximum Message Length