manualshive.com logo in svg

Honeywell 4800dr - Document Camera, Barcode Manual

Share
Download
Honeywell 4800dr - Document Camera Barcode Manual Download Page 9

1 - 1

1

Getting Started

About This Manual

This User’s Guide provides installation and programming instructions for the 4800dr document reader.  
Product specifications, dimensions, warranty, and customer support information are also included.

Honeywell document readers are factory programmed for the most common terminal and communica-
tions settings.  If you need to change these settings, programming is accomplished by scanning the bar-
codes in this guide.

An asterisk (*) next to an option indicates the default setting.

Unpacking the Document Reader

After you open the shipping carton, take the following steps:

• Check for damage during shipment.  Report damage immediately to the carrier who delivered the 

carton.

• Make sure the items in the carton match your order.
• Save the shipping container for later storage or shipping.

The packaging for this device is as eco-friendly as we could make it.  Please recycle the packaging. 

Document Reader Models

The chart below lists the interfaces that can be used with your document reader.

Connecting the Document Reader with USB

Note:

See 

"Document Reader Models"

 on page 1-1 to determine which interfaces apply to your 

document reader.

A document reader can be connected to the USB port of a computer.  

Model

Interface

4800drXXXXX

TTL level 232

USB keyboard

USB HID

USB retail (IBM SurePOS)

USB COM port emulation

Summary of Contents for 4800dr - Document Camera



















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands